While 20 years ago, you probably found wallpaper stylish, it’s likely no longer in fashion. If you’ve decided to rip off the old wallpaper, you’ll find that it is easy and straight-forward to do. Here are 6 simple steps to help you with your wallpaper removal project. If you’ve decided to replace the old wallpaper, you’ll also find it easier to complete the process once you’ve completed it. And if you’re wondering how to remove wallpaper without damaging your new paint job, keep reading to learn about wallpaper removal.
Firstly, prepare the work area. Prepare the walls before you begin removing the wallpaper, including covering the floor with a non-slip canvas and securing all electrical outlets with tape. Next, begin with the wallpaper by starting at a corner or seam, so that you don’t tear underlying drywall paper. Also, make sure to protect the baseboards with a drop cloth to avoid causing damage to them. Lastly, use a rag to wipe up any remaining wallpaper, including glue and dirt.
Once you’ve prepared the area, it’s time to test the strength of the glue and paste used to hang the paper. A plastic gutter or a towel can catch any water that falls from the wall, and can be replaced if needed. Using water to remove wallpaper can cause damage to the wall underneath. In this case, it is best to leave the backing intact. However, you shouldn’t cut the paper with a plastic putty knife, as it is too thick to get underneath it.
If you’re planning on using a putty knife, make sure that the wall beneath it is smooth and sheen. Start by unstripping the top left corner of the wall. Next, hold the first sheet of paper between your fingers. Pull it straight down, making sure to avoid any curls or bends. If this method doesn’t work, you can use a paper scraper for stubborn patches. Finally, make sure you have plenty of water handy to rinse off the sticky residue.
When steaming, make sure to wear protective eyewear and gloves to protect yourself from the steam. If you’re removing multiple layers of paper, you may need to steam each layer separately. Make sure to place a large trashcan nearby to catch any splatters. This step is particularly important if you’re trying to remove a layer of wallpaper. If you’re doing this in a high-traffic area, you’ll need to cover the surrounding areas, as steam can cause spattering.
Depending on the type of wallpaper, removing it yourself will reduce your expenses. Porous and strippable wallpaper is easiest to remove, while nonporous wallpaper, vinyl 6, acrylic, and woodchip wallpaper are harder to remove. Also, the older wallpaper may not be as strongly adhered, so it will cost more to get rid of it. More difficult to remove is wallpaper that has multiple layers, which will require steaming and soaking.